top of page

HIGH PRESSURE VALVES & ACTUATORS

Direct High Pressure    (DHP) Valve

Brass Forged high pressure valve suitable for extinguishing agents like CO2, and other inert gases used in suppression systems, with 25mm valve connection and output pressure of 15 Bar approx

IMG_6690.jpg

Indirect High Pressure (IHP) Valve

Brass Forged high pressure valve suitable for extinguishing agents like CO2, and other inert gases used in suppression systems, with 25mm valve connection and high output pressure to flush the area of oxygen

IMG_5433.jpg

Clean Agent Total Flooding Valve 2.5"
TPED AND PI APPROVED

Brass Forged valve with large orifice of 33mm for rapid discharge of clean agent extinguishant. Operation pressure of 25 Bar, inlet connection of 2.5" inch and outlet connection of 1 7/8 inch

Screenshot 2025-03-09 112428.png

Clean Agent Total
Flooding Valve 3"
TPED AND PI APPROVED

Brass Forged valve with large orifice of 49mm for rapid discharge of clean agent extinguishant. Operation pressure of 49 Bar, inlet connection of 3" inch and outlet connection of 2 1/2" inch

CO2 Flooding Valve 
TPED & PI APPROVED

200 bar valve with Fixed and Solenoid Actuation for use in 25-50 bar clean agent applications. Can be used as a pilot cylinder valve or for smaller, single cylinder installations where solenoid actuation is required.

IMG_6350.jpg

Electromagnetic Actuator
TPED & PI APPROVED

Device to electrically actuate the release of extinguishing agent. Its has a rating of IP65, operating at 24V DC suitable for connection on both 2.5" and 3" clean agent total flooding valve.

IMG_5542.jpg

Manual & Pneumatic Actuator
TPED AND PI APPROVED

This device used for actuation of the clean agent total flooding valve either manually or pneumatically by the use of a pilot line hose connection present. Suitable for both 2.5" and 3" valves

Pneumatic Actuator
TPED AND PI APPROVED

This device used for actuation of the clean agent total flooding valve pneumatically by the use of a pilot line hose connection present. Suitable for both 2.5" and 3" valves

bottom of page