Range imageValves & Actuators
Check Valve CV33 / CV49
Brass manifold check valve, 60 bar, in 2" and 2½" sizes.
Part codeCV33 / CV49
Loading page
Range imageBrass lever actuator for manual cylinder release, M42x1.5.
Brass machined lever actuator that mounts to the cylinder valve on an M 42 x 1.5 thread and releases the charge by hand.
It provides the mechanical means of last resort: if detection or power has failed, an operator can still discharge the system at the cylinder. Normally fitted alongside the electrical actuator on the master cylinder of a bank.
Configuration review. Catalogue reference data for Manual Actuator MACT: MOC: Brass Machined; Type: Manual; Thread Connection (Valve): M 42 x 1.5. These values describe this product. Confirm the remaining interfaces and operating requirements against the system drawing and current manufacturer documentation.
Selection checks. Compare the mechanical interfaces and actuation method with the cylinder or equipment drawing. Working pressure, relief settings and accessory-port details serve different purposes and must be reviewed separately. For electrical actuation, also check voltage and demand against the control output. Request confirmation of the complete assembly before substituting a part.
Before ordering. For a Manual Actuator MACT quotation, provide the required quantity, installation or replacement context, and the associated equipment model. Include photographs or drawings of the interfaces and any project documentation requirements. Ask the supplier to identify the exact offered configuration and the scope of installation, commissioning or servicing included.
Range imageValves & Actuators
Brass manifold check valve, 60 bar, in 2" and 2½" sizes.
Range imageValves & Actuators
What buyers and engineers most often ask before specifying the Manual Actuator MACT.
Ask your own questionCatalogue reference data for Manual Actuator MACT: MOC: Brass Machined; Type: Manual; Thread Connection (Valve): M 42 x 1.5. These values describe this product. Confirm the remaining interfaces and operating requirements against the system drawing and current manufacturer documentation.
Compare the mechanical interfaces and actuation method with the cylinder or equipment drawing. Working pressure, relief settings and accessory-port details serve different purposes and must be reviewed separately. For electrical actuation, also check voltage and demand against the control output. Request confirmation of the complete assembly before substituting a part.
Send the project details. We’ll confirm the configuration and prepare a quote.
Ø25 mm orifice forged brass valve for smaller clean agent flooding cylinders.
Range imageValves & Actuators
Ø33 mm orifice forged brass valve with 2½" UN inlet for mid-range cylinders.
Range imageValves & Actuators
Ø49 mm orifice valve rated to 42 bar for the largest flooding cylinders.